What Are Solar Panels?

Solar panels are devices, which convert light into electricity. They are found in rectangular shapes and are normally installed in combination to generate electricity. Some scientists even call them photovoltaics.
 

The main component of a solar panel is solar cells. Presently, about eighty percent solar panels are made from the crystalline silicon solar cells and the rest twenty percent is made from cadmium telluride solar cells. 

The solar panels are sealed hermetically and covered in a non-reflective glass. This is done to protect the photovoltaic cells from any kind of environmental damage. They are even placed in a rigid frame. The frame is typically designed to prevent it from deforming, which may be caused sue to strong winds or freezing weather. The frame however has a drainage hole, which prevents water buildup on panels. The back portion of the panel is even sealed to prevent all sorts of damages.
 

Solar panels are mainly used to generate power. So with installing them you can reduce your dependency on traditional power sources and lower your energy bills. You can find a lot of commercial buildings and residences using these solar panels nowadays. They are being mainly installed in places like city buildings, wide empty spaces like desert, on the residences, rural areas, commercial buildings, solar street lamps and many other places.
 

If you stay in Vitoria and want to install a solar panel but do not have the money for doing it, look for a state government solar energy grant in Victoria.  There are many companies in Victoria with whom you can discuss and unlock funding for your energy saving initiatives. 

What are Hard Water Spots and How to Remove Them?

Water isn’t the same everywhere. In a few areas, there is a high mineral content like magnesium and calcium in water. It is this kind of water, which is known as hard water. After this kind of water evaporates from a surface, for example a window, it leaves spots called lime scale or calcium deposits. Initially, it is not that noticeable but after some time, deposits are buildup forming a thick whitish glaze. Getting off these deposits in its early stage is easy but over time, they become difficult to remove, giving the windows an unpleasant haziness and a rough texture.

As an expert in commercial window cleaning services, Pharo Cleaning Services has provided a foolproof way of getting rid of these hard water stains on the windows. These ways are sure to leave the surfaces sparkling clean.

Apply white vinegar or lemon juice

If the stains are really tough to remove from the windows, then use white vinegar. Soak a towel into the white vinegar and erase the spots or spray the vinegar in the glass to erase those hard spots. Make sure you wear rubber gloves for protecting your hands from the acidity of the vinegar. You can also use lemon juice and mix it with water to be sprayed on the glass for spot removal.

Use baking soda

This is a great way of removing the hard spots on the windows. All you need to do is mix it with water and then apply it on the panes. After applying them, you should use a towel top wipe it and then rinse it thoroughly.

Use rubbing alcohol

Mix 4 parts of water with 1 part of rubbing alcohol to wipe the glass. This mixture can remove mild water spots and it is great for maintaining windows.

Erase with ammonia

Liquid ammonia is a great cleaner of glass. Soak the towel in the mixture of water and ammonia and then use it for removing the spots on the panes. Be very careful when using ammonia solution and make sure to wear goggles and rubber gloves.

Use microfiber

Microfiber cleaning materials are very effective in removing hard water spots. Use a cloth of this material along with a commercial window cleaner or vinegar for removing them.

Consider cola

Cola is very strong and you can use them to clean almost everything from bronze coins to carpets. The substance can even be used to remove water spots on the windows.

Above mentioned points is some of the window cleaning tips for removing hard water spots. Try them out if you have them on your glasses.

Different Kinds of ESD Brushes

There are many kinds of Electro Static Discharge (ESD) brushes available. Conductive, dissipative and anti-static.

The conductive brushes have surface resistivity range of 102 - 104 and are best to use when you want to remove the buildup of static from work surface. These brushes act as conduit between charged surface and path to ground. They are manufactured with completely conductive materials, which range from metal wires like phosphor bronze, carbon steel and stainless steel to fibers like carbon fiber, conductive nylon and special fiber.

The dissipative brushes have surface resistivity range of range of 105 – 1011, which is basically higher than conductive brushes but generally conductive for precluding any kind of static build-up in brush. They are great tools, which are to be used to remove any static charge, which will result in adhesion of particles. Frequent use of these tools keeps electrostatic charges from developing on your items.

Anti static brushes give the electronics manufacturer and static charge sensitive products tools for cleaning as well as manufacturing, which do not create the static charges. These brushes are usually made up of low charging materials and natural materials and come in various sizes and shapes, the most common resembling a pencil, toothbrush or acid brush. In voltage sensitive applications, they are to be used in liquid environment. Applications of these brushes include pushing, applying, cleaning, spreading and cleaning.

There are many online suppliers that sell these kinds of brushes. If you are looking for one of them, browse online and you will come with plenty of suppliers to choose from. However, if you are looking for platers brush, flue brush, abrasive brush or any other kind of power brushes, contact Hight Brush, the brush supplier in Texas.

Guest Author: John loves writing articles on various topics. He writes about cleaning, painting, social media and many other topics.